The GrandWall stainless steel rappel ring helps you retrieve your climbing rope at the end of a rappel and ensures your rope pulls free from the anchor; works with slings or chain anchors.
Note: No...
Stainless Steel multi-point belay station with more clip-ins along the chain, hangers, and ring. The 2 bolt hangers holes take 10mm and 3/8inch expansion bolts.
Stainless Steel Bolt Hanger 10mm with blunt, large radius edges to protect the carabiners. The hanger eye takes more than one carabiner.
Breaking Strength: 30kN
Weight: 52g (1.8oz)
Made in Taiwan
Stainless Steel Bolt Hanger 10mm with inner ring diameter of 35mm and outer diameter of 55mm. The hanger ring takes more than one carabiner.
Breaking Strength: 30kN
Weight: 140g (5oz)
Made in Ta...
Light and small hot-forged screw-gate carabiner made of aluminum alloy. CE Certified: CE 0321 EN 12275
Technical Specifications:
Strength major axis closed: 24kN
Strength major axis open: 8kN
Stre...
These Dyneema slings are 10.0mm wide and have nylon stitching for extra high strength, durability, and low weight.
CE Certified: CE 1019 EN 566
Breaking Strength: 22kN
Length: 60cm and 120cm
Width...
Stainless steel 3 inches long expansion bolt 10mm in diameter with nut and washer for rock climbing routes.
Weight: 55g (1.9 oz)
Length: 80mm (3 inches)
Maximum Torque: 25 foot-pounds
Made in T...
The GrandWall nut tool is designed for recovering your stuck protection.
Made of stainless steel.
Built-in wire clip carabiner for quick racking.
Length: 205mm;
Weight: 49g
Made in Taiwan
These Nylon slings are 16.0mm wide and have nylon stitching for extra high strength, durability, and low weight.
CE Certified: CE 1019 EN 566
Breaking Strength: 22kN
Width: 16mm/0.63in
Weight: ...
A mountaineering, alpine, or big wall climbing essential, this lightweight pulley is ideal for crevasse rescue and hauling systems. Pivoting side 7075-T6 aluminium plates allow quick rope threading...
These aid hooks are an essential piece of equipment in your aid rack.
Can be used as bat hooks, in drilled placements, or on "dead heads".
Made of 4130 Chromoly Steel for extra strength and durabil...
Stainless steel quick link for equipping anchors, setting up rappels, fixing quickdraws, or as an emergency back-off option. The 8mm quick link requires a 14mm open-end wrench.CE Certified: CE 0321...
Placed between the rope and a load, this swivel allows the load to turn without twisting the rope when hauling. The encased sealed ball bearing unit keeps the swivel action smooth even after years ...
Light and small hot-forged screw-gate carabiner made of aluminum alloy. CE Certified: CE 0321 EN 12275
Technical Specifications:
Strength major axis closed: 24kN
Strength major axis open: 7kN
S...
Hot-forged straight-gate carabiner made of aluminum alloy.CE Certified: CE 0321 EN 12275
Technical Specifications:
Strength major axis closed: 25kN
Strength cross-loaded: 9kN
Strength major axis o...
hot-forged triple-lock carabiner made of aluminum alloy. CE Certified: CE 0321 EN 12275
Technical Specifications:
Strength major axis closed: 24kN
Strength major axis open: 7kN
Strength cross-load...
Small and lightweight ascender made of aluminum alloy for superior strength and durability. CE Certified: CE#1019 EN#353-2
WARNINGS: This device is strictly designed for limited rope-grab mountaine...
Large twistlock carabiner made of steel.CE Certified: CE#0321 EN#362
Technical Specifications:
Strength major axis closed: 35kN
Strength major axis open: 9kN
Strength cross-loaded: 9kN
Gate open c...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
